GB
It is essential that instruction manual is read before the
power tool is operated for the first time.
Always keeps this instruction manual together with the
power tool. Ensure that the instruction manual is with the
power tool when it is given to other persons.
Table of Contents
1. General Power Tool Safety Warnings . . . . . . . . . . . . . 10
2. Check before Use . . . . . . . . . . . . . . . . . . . . . . . 11
3. Noise and Vibration Emissions . . . . . . . . . . . . . . . 12
4. Specifications and List of Contents . . . . . . . . . . 12
5. Descriptions of Functions and Applications . . . . . 13
6. Operating Instructions . . . . . . . . . . . . . . . . . 13
7. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 14
General Power Tool
Safety Warnings
WARNING! Read all safety warning and
all instructions. Failure to follow the warning
and/or serious injury. Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to
your mains -operated (corded) power tool or
Battery-operated (cordless) power tool.
1) Work area safety
а) Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
а) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed or
10
ELECTRIC HAMMER
Note
As our engineers are striving for the constant
research and development to develop the quality
of products, shape or structure of our model can
be changed without previous notice.
grounded surfaces such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord
carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
а) Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
c) Prevent unintentional starting. Ensure the
switch is in the off position before connecting
to power source and/or battery pack,
picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
b) Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal injuries.
