Mx Onda MX-PG2200X Manual De Usuario E Instalacion página 16

This unit operates with a voltage of 220/240 V, to avoid a possible electrical
shock not try to open it. This equipment does not have part some that could
be repaired by your, in the event of a wrong operation not manipulate it, and
attend to an Official Technical Service MX ONDA.
Waste electrical products must not be disposed of with
household waste.
This equipment should be taken to your local recycling centre
for safe treatment.
This product complies with European Directives
RoHS (2011/65/UE), on the restriction of use of
certain dangerous substances in electrical and
electronic appliances.
INTRODUCTION
MX ONDA thanks you for the deference you have had when purchasing this
product. The gas hob model MX-PG2200X has been manufactured with high
quality materials, its design makes it suitable for any type of kitchen. Among
others it has the following characteristics:
Base in 304 # stainless steel with 0.6 mm thickness.
3 cooking zones:
Auxiliary: For containers of 10 to 14 cm Ø / calorific value: 1 kW
Semi fast: For containers of 16 to 20 cm Ø / calorific value: 1.8 kW
Triple ring: For containers of 24 to 26 cm Ø / calorific value: 3.4 kW
Compatible with butane gas (G30) and natural gas (G20)
Electric ignition system
Burner and brackets in cast iron
BEFORE CONNECTING THE HOB
Read these instructions carefully and keep them for later use.
After removing the packaging, check that the appliance is not
damaged. If in doubt, do not use it; Contact the technical
support staff.
All operations related to the electrical installation and gas
supply must be carried out by a specialized and authorized
installer.
Check that the voltage of your outlet is 220/240 V ~ 50 Hz and
that it is equipped with an earth connection.
WARNING
2