Idiomas disponibles
Idiomas disponibles
Safety Information
Shut off air supply, drain hose of air pressure and dis-
connect hose reel from air supply when not in use.
General Maintenance and Service Safety
• In the event of malfunction, please contact the customer
service responsible.
• Release pressure before disconnecting the hose.
• Daily check for damaged or loose hoses and fittings and
rectify immediately. Damaged hoses or fittings must be
replaced.
• Protect the hose from contact with sharp edges, flames,
hot parts and solvents.
• Dispose of used filter elements in compliance with na-
tional regulations.
WARNING Risk of Injury
Opening the system when under pressure could damage
the unit and cause serious injury.
Ensure that the system is pressure free before open-
►
ing the filter reservoir.
WARNING Risk of Injury
Opening the system under pressure can damage the
maintenance unit and cause serious injury.
Make sure the system is no longer under pressure
►
before opening the oil reservoir.
Safety instructions
• Shut off air supply and depressurize system before in-
stalling unit.
• Only operate within the stated ranges of safe operating
temperatures and pressures. Before installation, compare
the technical data with the actual operating conditions.
• The pneumatic system in which the unit is used must
comply with ISO 4414, "Pneumatic fluid power – Gen-
eral rules and safety requirements for systems and their
components."
• Ensure the unit is correctly installed for the direction of
air flow as indicated by the arrow symbol on the unit.
• Contact with solvents and other chemicals can cause
chemical attack and subsequent burst.
• The unit must not come into contact with acetone, ben-
zol, brake fluid, glycerine, some synthetic oil, chloro-
form, carbon tetrachloride (and similar solvents), carbon
disulphide, methyl alcohol, perchloroethylene, toluene,
trichloroethylene, xylene (nitrocellulose, thinner), acetic
acid.
• The bowl and other plastic parts must only be cleaned
with warm water and normal washing-up liquid.
• This unit must not be modified.
4
Useful Information
Website
Information concerning our Products, Accessories, Spare
Parts and Published Matters can be found on the Chicago
Pneumatic website.
Please visit: www.cp.com.
Country of Origin
Germany
Copyright
© Copyright 2022, CHICAGO PNEUMATIC Tool Co.LLC,
1815 Clubhouse Road, Rock Hill, SC 29730 - USA
All rights reserved. Any unauthorized use or copying of the
contents or part thereof is prohibited. This applies in particu-
lar to trademarks, model denominations, part numbers and
drawings. Use only authorized parts. Any damage or mal-
function caused by the use of unauthorised parts is not cov-
ered by Warranty or Product Liability.
Caractéristiques techniques
Caractéristiques techniques
Pression
(1) Pression d'entrée (Max.)
(2) Pression de sortie (Max.) 10
Conditions d'utilisation
Température
© Chicago Pneumatic - 6159990160
Air Filter - Regulator - Lubricator
Valeur
16
Valeur
-10 à +50
+40 à +122
Unité
bar
bar
Unité
°C
°F
