Idiomas disponibles
Idiomas disponibles
Air Filter - Regulator - Lubricator
Technical Data
Technical Data
Pressure
(1) Inlet Pressure (Max.)
(2) Outlet Pressure (Max.)
Operating Condition
Temperature
Declarations
Regional Requirements
WARNING
This product can expose you to chemicals including
lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For
more information go to
https://www.p65warnings.ca.gov/
Safety
DO NOT DISCARD - GIVE TO USER
WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this
product.
Failure to follow all instructions listed below may result
in electric shock, fire, property damage and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be
respected at all times.
Statement of Use
• For professional use only.
• This product and its accessories must not be modified in
any way.
Value
Unit
16
bar
10
bar
Value
Unit
-10 to +50
°C
+40 to +122
°F
© Chicago Pneumatic - 6159990160
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the prod-
uct cease to be legible or become detached, replace with-
out delay.
• The product must only be installed, operated and ser-
viced by qualified personnel in an industrial environ-
ment.
Intended Use
This product is intended to be used as an air filter / regula-
tor / lubricator (in combination or separate, as indicated in
the manual).
No other use is permitted. For professional use only.
Product Specific Instructions
General Installation Safety
• Air lines must be cleaned before connected to the unit.
Dirt particles can cause serious malfunctions.
• Whipping hoses can cause severe injury. A shut-off
valve must be sited immediately upstream of the hose
reel and be easily accessible.
• If liquid, paste or fibrous materials are used for sealing
the connections, these must be carefully prevented from
getting into the unit. These materials can cause serious
malfunctions.
WARNING Risk of Injury
Wrong installation and flow direction are potentially
hazardous.
Install filters, regulators, and lubricators in vertical
►
position only.
Adhere to the flow direction marked on each mod-
►
ule.
General Operation Safety
WARNING Risk of Injury
The system is operating under pressure. Incorrect instal-
lation could damage the unit and cause serious injury.
Before start-up, check that all connections, ports,
►
and modules have been correctly installed.
WARNING Risk of Injury
If no filling unit is used, the system will suddenly be un-
der pressure during start-up, causing dangerous and sud-
den cylinder movements.
When starting up a system without a filling unit,
►
make sure that the cylinders are in their end posi-
tion. For cylinders not in end position, make sure
they do not present any danger.
WARNING Risk of Injury
Harmful oil mists are produced in the compressed air
systems.
Lubricators must be operated in closed pneumatic
►
systems only.
Safety Information
3
