Idiomas disponibles
Idiomas disponibles
en
Always follow the operating instructions
for the base unit!
This appliance is designed for processing
normal quantities of food for domestic use
and is not suitable for industrial use.
Mincer attachment for processing raw
or cooked meat, bacon, poultry and fish.
Safety Information
The mincer attachment must be completely
assembled before use. Never assemble the
mincer attachment on the base unit.
Before attaching/removing the mincer attach-
ment, wait until the drive has come to a standstill
and pull out the mains plug.
Operate the mincer attachment in the indicated
operating position only.
Never use the mincer without the perforated
disc and threaded ring.
While operating the appliance, never reach into
the filling shaft, use the pusher to push in the
ingredients. Risk of injury from sharp cutting
discs!
Keep children away from the appliance.
Predetermined breaking point
The built-in predetermined breaking point
protects the drive from damage.
The coupling part on the worm gear breaks
if an overload occurs (e.g. bones fed in by
mistake) and protects the appliance from
damage.
Spare part available from customer service.
Overview
Please fold out the illustrated pages
Figure B
a
Pusher
b
Filler tray
Housing with locking lever
c
Worm gear
d
Blade
e
Perforated disc
f
Threaded ring
g
Robert Bosch Hausgeräte GmbH
Operating the appliance
Important information
The appliance cannot be operated
with the mincer attachment until the
protective cover is placed on the
blender drive.
"
Thoroughly clean accessories before
using for the first time, see "Cleaning and
care".
Fig. A
Assembling the mincer attachment
"
Insert worm gear d into the housing c.
"
Insert blade e with the edges towards
the perforated disc f.
"
Insert perforated disc f.
"
Attach threaded ring g but do not tighten
fully.
Securing the attachment to the
base unit
"
Place the appliance on its back
as indicated.
"
Open the locking lever (Fig. A5).
"
Place the mincer attachment, with foot
pointing downwards, on the drive for the
bowl and throw the locking lever.
"
Firmly screw threaded ring.
"
Attach filling tray.
"
Insert pusher into the filling shaft.
Operating the appliance
"
Place a bowl or plate under the outlet
opening.
"
Place the food to be processed in the
filling tray.
5090 471 814 | 11.2007
5
