Idiomas disponibles
Idiomas disponibles
3. In the ON mode move the target zones of the transmitter and receiver near to
each other (just like during activation) and hold them together for 3 seconds –
until an increasing tone is heard.
4. Move the receiver far from the transmitter.
If you activated the function properly, the message BEEPER will appear on the dis-
play of the receiver in the main navigation panel. In the top line of the display is
shown the message BEEPER, if the function is activated in the transmitter of at least
one dog.
Setting the BEEPER function:
The BEEPER function must be set properly before the hunt.
1. On the receiver, select the number of the dog in the main navigation panel.
2. Hold the BEEPER button for long time– the display will show the first parameter
for the setting
3. Use the arrows
4. To select other parameters, use repeated long hold of the button BEEPER. The
adjusted parameters will appear in this order.
(mode) – setting the mode
(sensitivity) – setting the sensitivity
(time) – setting the time
(loudness) – volume
5. To return to the main screen push
Setting the mode – :
In the device we can select from 7 modes:
Mode No.
0
1
2
3
4
5
6
WARNING: The audible and vibration indication can be set up for a maximum
of 4 dogs, the visual indication is adjustable for 9 dogs. When the sound and
vibration indicator is set, individual dogs can be identified by the number of
beeps / vibrations (max. 4 beeps or vibrations) indicating movement / stationary
position of the dog. If the acoustic and vibration indication is set for more dogs,
vibration and sound are running simultaneously
16
– the mode.
/
to select the value.
indication
motion
Beeper text blinking
-
-
-
-
audio
vibration
.
stationary
-
audio
vibration
audio
vibration
-
-
Hunt type
-
Bird hunt
Bird hunt
Wild boar hunt
Wild boar hunt
-
-
