Idiomas disponibles
Idiomas disponibles
Switching off the function FENCE:
1. Select the required dog number in the main navigation panel, for whom you want
to switch off the function FENCE.
2. Press and hold the button FENCE.
3. Using the arrows
4. Briefly press
to return to the main navigation panel.
8.4 WAYPOINT – storing the receiver position
The waypoint feature allows you to save the GPS coordinates of the location on
which the receiver is now (the manual device). You can later navigate to the saved
point. Up to 4 points (waypoints) can be stored in one receiver.
Storing the waypoint:
1. Hold the CODE button on the receiver for 2 seconds.
2. Use arrows
/
waypoint can be stored only to position 6 through 9. If the position is empty (no
paired transmitter or any waypoint is in the position) the message
shown on the display.
3. Hold the BEEPER button for 2 seconds – a message
shown.
4. Push the button
To navigate to the stored waypoint, use arrows
navigation panel to get to the given position.
Deleting a waypoint:
1. Turn off all transmitters (dog collars) near the receiver.
2. Hold the CODE button on the receiver for 2 seconds.
3. Use the arrows
4. Hold the CODE button for 2 seconds – after some 10 seconds a message
will appear
5. Push the button
WARNING: If you store a waypoint in a position where you have a paired
transmitter, this transmitter will be deleted from the receiver memory.
8.5 BEEPER function
The BEEPER function is mainly used by foresters/hunters to distinguish the intensity
of movement or the presence of a dog near a wild boar.
Modes 0, 1, 2, 5, 6 serve to inform you whether the dog is in motion or immobile
(stalking the game). Modes 3, 4 serve to inform about the presence of a dog near a
wild boar.
Turning on:
1. Turning on the transmitter (dog collar) – see chapter 6.3 Turning the transmitter
ON/OFF on page 10.
2. On the main navigation panel use the arrows
dog.
set OFF.
/
to select the position you want to store as the waypoint. The
for return to the main screen.
/
to select the position you want to delete.
for return to the main screen.
/
selection on the main
/
to select number of the given
is
will be
15
