Idiomas disponibles
Idiomas disponibles
English
no bending of the test probe
correct position of the respective test probe types
The spring-loaded test probes can be extracted and installed quickly without the need for addition-
al wiring thanks to the receptacles. Specialised insertion and extraction tools are available from
INGUN to replace test probes.
Appropriate extraction tools are also available from INGUN to replace defective receptacles. The
tool cuts into the wall of the used receptacle when screwed in. Using the spring-loaded weight, the
receptacle can then be removed without damaging the mounting hole.
Extraction tool for receptacles
7.3)
Cleaning test probes
Test probes can be cleaned with commercially available, soft plastic or glass fibre brush or clean-
ing mats to remove severe contamination.
©
INGUN: Subject to technical changes without notice. E&OE.
Insertion and extraction tools for test probes
1) Stop
2) Weight
3) Compression spring
4) Adapter
5) Threaded pin
6) Insert (bit)
7) Probe plate
8) Receptacle
46
