Idiomas disponibles
Idiomas disponibles
1)
Introduction
1.1)
Target group
These operating instructions contain important information about operating and servicing the
manual test fixture. It is intended for persons who install, commission, and maintain the test fix-
ture. The instructions do not describe which manual test fixture should be used for each pending
task should. The INGUN test fixture catalogue provides this information.
1.2)
Manufacturer and service address
INGUN Prüfmittelbau GmbH
Max-Stromeyer-Strasse 162
78467 Konstanz
Germany
Tel. +49 7531 8105-0
Fax. +49 7531 8105-65
www.ingun.com
1.3)
Warranty claims
In all cases, our general terms and conditions are applicable. These can be downloaded from our
website: https://ingun.com/en-GB/gtc/http://www.ingun.de/media/pdf/AGBs_de.pdf. Warranty
and liability claims, for example, in case of personal injury and product damage are excluded,
when they are related to one or more of the following causes:
Improper installation, commissioning, or operation of the test fixture
Operation of the test fixture when the safety features are defective or when the safety and
protective equipment is not properly installed or not working correctly.
Unauthorised design or mechanical changes are made to the test fixture
Failure to comply with maintenance intervals or when the maintenance work is not carried out
correctly.
Repair work has not been correctly performed
Installation of spare parts that do not meet the stipulated technical demands of the
manufacturer.
Catastrophic events due to external influence or force majeure
Improper use of the test fixture
1.4)
Copyright
These operating instructions are protected by copyright. The instructions may not be used or com-
municated for competitive purposes without authorisation. Any such use is only permitted with IN-
GUN's express consent.
29
©
INGUN: Subject to technical changes without notice. E&OE.
English
