Parkside PLHLG 2000 C2 Traduccion Del Manual De Instrucciones Originale página 19

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 98
nally produced parts results
in the immediate loss of the
warranty claim.
Using the device
Caution! This is how to
avoid damage to the
equipment and possible
personal injuries resulting
from this:
• Do not use the device in the
rain. Only work in daylight
or at good light.
• If you are tired or lacking in
concentration or have con-
sumed alcohol or tablets, do
not work with the device. Al-
ways have a break on time.
Work using common sense.
• Never leave the device unat-
tended at the workplace.
• A fire can develop if the de-
vice is not handled carefully.
- Be careful when using the
devices near flammable
materials.
- Do not point at the same
location for an extended
period of time.
- Do not use in an explosive
atmosphere.
- Heat can be passed to
flammable materials that
are hidden.
- After using the device, put
it on the stand and allow
it to cool down before it is
packed away.
- Do not leave the device
unattended as long as it is
in operation.
Use as a solid fuel lighter
/ use of the grill lighter
nozzle (15)
• Check that the solid fuel light-
er is in the correct position.
• Isolate from the mains before
removing it from the fire.
• Allow the solid fuel lighter to
cool down before packing it
away.
• The connection cable or oth-
er flammable materials must
not come into contact with
the hot parts of the solid fuel
lighter.
Electrical safety
Caution: This is how to
avoid accidents and inju-
ries by an electric shock:
• Make sure that the mains
voltage matches the details
on the type plate.
• Connect the device only to a
socket with a residual current
circuit breaker (RCD) with a
tripping current of not more
than 30 mA.
• Keep the appliance away
from rainy or wet conditions.
• Do not use the mains cable
to pull the plug from the
socket. Protect the mains ca-
ble from heat, oil and sharp
edges.
• Switch the device off and
pull the mains plug out of the
socket if the mains cable is
damaged. If the connection
cable of this device is dam-
GB
MT
19
loading