Irradio VDP-IR150WF Manual De Instrucciones página 61

maintenance usually consists only of any cleaning operations.
All maintenance operations must be carried out with the
projector is switched off, cooled down and disconnected from
the power mains: if the projector has been used recently,
perform maintenance only at least one hour after switching it
off.
Periodic cleaning of the air flow accesses is necessary:
proceed gently using an extremely soft brush, in any case
avoiding vacuuming. The lens does not require cleaning, as it
is unlikely to come into contact with any type of material: if
necessary, simply remove dust by means of light blowing of
dry air, using for example a canister of compressed air from a
considerable distance. To clean structural parts, use a damp,
non-abrasive cloth, avoiding solvents or excessively
aggressive detergents. Wait until it is completely dry before
reconnecting the projector to the power supply.
17. TECHNICAL DATA
Model
Projection system
Lighting system
Projection distance
Projection dimensions
Proportions
Video extensions supported*
Video formats not supported*: MSVC/CRAM, MP42, GMC,
Audio extensions supported*
: VDP-IR150WF
: LCD
: LED
: from 1.2 m to 5.2 m
: from 36" to 170"
: 16:9 or 4:3
: AVI, MPG, MP4, RMVB, FIV,
MOV, MKV, TS, M2TS
IV32, RLE, cvid, RV20, DivX,
RM, VC1, FLV
: WAV, WMA, AAC, MP3,
FLAC, M4A
60