Idiomas disponibles
Idiomas disponibles
respect to the surface on which the image will be
projected.
In the case of ceiling installation:
Use a special installation bracket (not supplied): the
projector is provided with an M4 threaded hole in the
centre, into which the bracket screw must be inserted.
The projector will then be hung upside down, tilting the
image using the appropriate setting.
A ceiling-mounting bracket is normally provided with a
perforated plate to be attached to the ceiling by means
of expansion bolts (minimum diameter 6 mm), a shaft
perpendicular to it (normally adjustable length) and one
or more arms, also adjustable in length, provided with
four holes through which metric screws (thread F4) can
be inserted to join the projector to the bracket. The load
bearing capacity of the dowelling should be at least
double the sum of the weight of the projector and the
bracket.
Once the projector has been positioned, make the signal and
power connections, connecting the corresponding cables to
the sockets described in chapter 4 above.
Dimensions of the projection frame:
45
