EGO POWER+ ST1500-FC Manual Del Operador página 18

Orilladora inalámbrica con batería de iones de litio de 15 pulg y 56 voltios
Idiomas disponibles

Idiomas disponibles

STARTING/STOPPING THE STRING TRIMMER
Before starting the string trimmer
Make sure that you have a secure and balanced footing.
Stand upright and hold the string trimmer in a relaxed position.
Make sure that the cutting line is not touching the ground or any other objects.
Hold the string trimmer with both hands: one hand on the rear handle and one
hand on the front-assist handle.
To start the string trimmer (Fig. 12)
1. Press down the lock-off lever and
hold it in that position. Depress the
trigger to turn on the string trimmer.
2. The rotational speed of the cutting
line is controlled with the variable
speed trigger. More pressure on
the trigger results in higher cutting
speed; less pressure on the trigger
results in lower cutting speed.
Adjust the speed to suit the task at
hand.
NOTICE: The motor runs only when the lock-off lever and trigger are both pressed .
To stop the string trimmer
Release the lock-off lever and the trigger to stop the string trimmer.
WARNING:
breaks and after finishing work.
18
56-VOLT LITHIUM-ION CORDLESS 15" BRUSHLESS STRING TRIMMER
Always remove the battery pack from the string trimmer during work
12
Lock-off Lever
Trigger
loading

Este manual también es adecuado para:

Power+ st1500Power+ st1500-sPower+ st1500-s-fc