Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
J.P. SELECTA
s.a.u.
CODE 80269 REV C
4.7 RS-232 SERIAL OUTPUT
By using the RS232 connection, data can be downloaded to an external
computer or directly to a serial printer. The readings are automatically
sent when the «ENTER» key is pressed after each reading.
•
Connection cable:
•
Transmission parameters:
Baud rate:
Parity:
Nº of bits:
Bits stop:
•
Transmitted characters:
After reading, the analyser sends a message, depending on the reading
type selected:
ABSEXX.XXE
TRAEXX.XXE
4.8 PERFORM A RESET
To load the factory program and delete any stored data, you can perform
a reset. The procedure is as follows:
Turn the equipment off, press the ENTER key and hold it and start the
equipment. RESET ? will appear on the screen. Confirm with the ENTER
key. To cancel the action, press the ESC key. This action can be useful
if you notice that the operation is not correct and before sending the
equipment for technical service.
5. GUARANTEE
This product is guaranteed for one year from the date of purchase against
faulty workmanship. The guarantee does not cover damages caused by
an incorrect use or causes beyond the control of J.P. SELECTA, S.A.U.
Any mistreatment of the equipment by unauthorised personnel not
approved by J.P. SELECTA, S.A.U. cancels the guarantee automatically.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: [email protected] - http://www.jpselecta.es
05/2023
9-pin Female
pin number:
2
3
5
1200;
None;
8;
1
10 chars + CR LF
10 chars + CR LF
Tel 34 93 770 08 77 Fax 34 93 770 23 62
Pag.: 16
E: space
E: space
