Idiomas disponibles
Idiomas disponibles
Problem
Cause
The display goes
The electrical outlet
blank.
Ground Fault Interrupter
(GFI or GFCI) has been
tripped and needs to be
reset.
Your digital control has
been damaged.
Food does not
The wrong cooking mode
bake or roast
is selected.
properly in the
The oven racks have not
oven.
been positioned properly
for the foods being
cooked.
Incorrect cookware or
cookware of improper
size is being used.
The oven thermostat
needs adjustment.
There is aluminum foil on
racks or oven bottom.
The clock or timers are
not set correctly.
Food does not
The oven controls are not
broil properly in
set properly.
the oven.
The oven door was not
closed during broiling.
The rack has not been
properly positioned.
Action
Replace fuse or reset circuit
breaker.
See page 23.
See page 27.
See page 17.
See page 42.
Remove foil.
See page 16.
See page 32.
See page 32.
See the broiling guide on page
33.
Information codes
Code
Meaning
symbol
Oven sensor malfunction.
The oven is overheating.
Check the Control PBA NTC
Sensor.
Temp probe malfunction.
Check the PBA NTC Sensor.
Check the PBA NTC Sensor.
Check the cooling system.
Control pad malfunction.
Door lock malfunction.
PCB signal malfunction.
Touch IC and PCB signal
malfunction.
Solution
1. Tap OFF, and then restart the
oven.
2. If the problem persists,
disconnect all power to
the oven range for at
least 30 seconds and then
reconnect the power.
English 61
