Location Requirements - Dacor Modernist DOC30M977D Serie Instrucciones De Instalación

Installation requirements

Location requirements

IMPORTANT: Observe all governing codes and ordinances.
• Cabinet opening dimensions that are shown must be used.
Given dimensions provide minimum clearance with oven.
• Recessed installation area must provide complete enclosure around the recessed
portion of the oven.
• Grounded electrical supply is required. See "Electrical connection" section.
• Electrical supply junction box should be located 3" (7.6 cm) maximum below the
support surface when the oven is installed in a wall cabinet. A 1" (2.5 cm) minimum
diameter hole should have been drilled in the right rear or left rear corner of the
support surface to pass the appliance cable through to the junction box.
• Oven support surface must be solid, level and flush with bottom of cabinet cutout.
• Floor must be able to support a Combi. oven weight of 287 lb (130 kg).
• Install the Combination - oven at least 12" (30 cm) away from other appliances.
IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet
supplier to make sure that the materials used will not discolor, delaminate or sustain other
damage. This oven has been designed in accordance with the requirements of UL and CSA
International and complies with the maximum allowable wood cabinet temperatures of
194 °F (90 °C).
10 English
NQ9300M_MOD_DOC30M977D_DE68-04479A-03_EN.indd 10 2019-09-20 PM 3:46:36