Explanation Of General View; General Power Tool Safety Warnings - Makita DTS130 Manual De Instrucciones

ENGLISH
(Original instructions)
1 Battery cartridge
2 Button
3 Red indicator
4 Star marking
5 Indicator lamps
6 Check button
7 Switch trigger
8 Lamp
9 Reversing switch lever
10 Bit
SPECIFICATION
Capacities
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of resi-
dence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.

General Power Tool Safety Warnings

WARNING Read all safety warnings, instruc-
tions, illustrations and specifications provided with
this power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.

Explanation of general view

11 Sleeve
12 Bit-piece
13 Screw
14 Hook
15 Groove
16 Air vents
17 Cooling down oil unit
18 Standard bolt
19 Fastening torque
20 Proper fastening torque
Model
–1
No load speed (min
Impacts per minute (min
Overall length
Net weight
Rated voltage
Machine screw
Standard bolt
High tensile bolt
)
–1
)
BL1415N / BL1430 / BL1430B / BL1440 / BL1450 / BL1460B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
ENE033-1
CORDLESS IMPACT DRIVER SAFETY
WARNINGS
1. Hold the power tool by insulated gripping sur-
GEA010-2
faces, when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the oper-
ator an electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
4. Wear ear protectors.
5. Do not touch the bit or the workpiece immedi-
ately after operation. They may be extremely hot
and could burn your skin.
6. Keep hands away from rotating parts.
21 Fastening time
22 High tensile bolt
23 Limit mark
24 Rear cover
25 Screws
26 Spring
27 Arm
28 Recessed part
29 Carbon brush cap
30 Hole
DTS130
M4 – M8
M6 – M10
M6 – M8
0 – 2,400
0 – 1,600
183 mm
1.5 – 1.7 kg
D.C. 14.4 V
GEB137-1
5