Idiomas disponibles
Idiomas disponibles
Danger of electric shock
if the power cable is dam-
aged! Always ensure that
the power cable is kept
well away from the imple-
ment and its cutting tools.
Wear eye and ear
protection.
Caution! - Sharp tools.
Ensure that the hands and
feet are kept well away
from the cutting tools. The
cutting cylinder continues
to rotate briefly after the
motor has been switched
off.
Always disconnect the
plug from the mains prior
to maintenance work or if
the power cable is dam-
aged.
Do not expose the device
to moisture. Never operate
the device in rain.
Attention! The rollers cont-
inue to move.
Noise level ratings L
in dB(A).
Protection Class II (Double
insulation)
Electrically powered im-
plements must not be dis-
posed of with the domestic
waste
Transport and working
positions
General notes on safety
This implement can cause
serious injuries if it is not
properly used. Please read
these Operating Instructions
carefully and familiarize
yourself with all the control
elements before operating
this implement. Keep these
Operating Instructions in a
readily accessible place so
that this information is al-
ways at your disposal.
In the event of an accident
or malfunction during ope-
ration, switch off the device
immediately and pull out
the mains plug. Injuries
must be properly treated or
medical assistance sought.
WA
Read the "Troubleshoo-
ting" section to correct any
malfunctions or contact our
Service Centre.
Operating the implement:
WARNING! The implement
can cause serious injuries.
How to a avoid accidents
and injuries:
GB
Switching
on/off
27
