Cressi ISUP Manual Del Usuario página 11

Manual pump
1
To inflate the SUP, make sure to correctly connect the hose to the manual pump, clockwise until
tight (Fig. 1). Manual pumps have two connections, one for inflating and one for deflating (Fig. 2).
Be sure to fasten the hose to the correct connection.
Turning the switch (Fig. 3) to the right activates the pump's double action. This is useful for
speeding up the first stage of the inflation. Turning the switch to the left activates the single
action mode, which is ideal for facilitating higher pressure inflation.
HP Valve
Inflation
1
The HP valve is a high-pressure valve. To inflate, unscrew the upper cap counterclockwise (Fig.
1). Make sure that the central pin is in the raised position. Insert the end of the inflation tube all
the way in, and twist it clockwise (Fig. 2). When you're done inflating, screw the cap back on. To
deflate the air chamber quickly, firmly press the pin to the lowered position (Fig. 3).
Position of the valves and inflation sequence
Single Chamber ISUP
Single air chamber models, equipped
with a valve at the stern.
Double Chamber ISUP
Double air chamber models, equipped with two valves: at the end of the pad
and at the stern.
2
2
1
2
Switch
SINGLE
ACTION
3
Deflation
3
1
DOUBLE
ACTION
7