Desoutter DR300-QR Serie Manual Del Usuario página 33

MAINTENANCE INSTRUCTIONS
● Service should be carried out at intervals of
1000 hours'use. Always quote tool model
number, serial number and spare part
number when ordering spares.
● All torque figures ± 10%.
● Overmould should be wiped clean with a
general purpose, nonaggressive degreasant.
● ●Indicates direction of dismantling.
●
When disposing of components,
lubricants, etc... ensure that the relevant
safety procedures are carried out.
WARNING
Never connect a part assembled tool to
the air supply. The rotor blades in this tool
have a PTFE content. The normal health
and safety recommendations concerning
PTFE must be observed when handling
these rotor blades.
● Do not smoke.
● Motor components must be washed
with cleaning fluid and not blown clear
with an air line.
● The silencer must be replaced when
dirty, do not clean and re-use.
● Wash hands before commencing any
other activity.
04/2017
2050504733
Issue no : 21
Series : D
33 / 72