Urmet 1760 Manual De Usuario página 14

Videointerfono 2voice manos libres wifi
Ocultar thumbs Ver también para 1760:
Idiomas disponibles

Idiomas disponibles

4.9.
PANIC ALARM
The panic alarm signal is sent from the video door phone to the switchboard in the system and to all
smartphones in which the call forwarding function has been activated via the CallMe app.
The activation of the "Panic Alarm" signal is only available if a key has been connected to the "PANIC"
terminals.
Press the key to activate the function.
ATTENTION! The panic alarm function assumes that:
the video door phone is configured in Local Power or Low rise block;
the system has a switchboard;
there is an operator on duty at the switchboard;
the switchboard operator has been duly instructed on what to do if a panic alarm is received.
When the user presses the key, a panic alarm message is sent to the concierge switchboard.
SEND TO CALLME APP
If the video door phone is configured in Local Power or Low rise block mode and if the call forwarding
function has been configured in the system, the "Panic Alarm" message is also sent to all Smartphones on
which the CallMe app is installed (for full details on how to configure the call forwarding function, see the
Parameter configuration booklet
In addition, if the video door phone is configured in Local power mode, through the CallMe app it is
possible to make an emergency call from the smartphone to the apartment that sent the panic signalling
alarm.
4.9.1 RESET PANIC ALARM
After sending the panic signalling alarm, it is possible to reset the sending of the signalling from the video
door phone.
Access the Homepage of the video door phone by pressing the
is in stand-by mode.
The display shows the following screen:
The following
Press the
key to reset the alarm.
4.10. MUTE FUNCTION
This function can be used to mute the ring tone on the video door phone and any connected supplementary
ringers.
The MUTE function does not exclude the ringing of the floor call.
The function can be activated in two different ways :
14
in the "Call Forwarding Function" chapter).
icon is displayed at the bottom left and allows resetting the panic alarm.
key twice when the video door phone
DS1760-040A
loading

Este manual también es adecuado para:

1760/181760/19