Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6. Patching And Managing Devices
This chapter will explain how to patch and manage fix-
tures. For operation with the Navigator RDM Expert, you
need to adjust the DMX start addresses on your fixtures
and you need to patch them, i.e. assign the DMX channels
to the control elements of the Navigator RDM Expert.
Step 1: Call the System Settings
After switching on, the controller is in manual mode and
the display indicates "Manual" in the upper line. In or-
der to perform the following steps keep the MENU button
pressed for 3 seconds to call the system settings. The dis-
play indicates the first menu item 01. Patch fixture an (oth-
erwise select it with the PAN wheel). All necessary DMX set-
tings can be made in this menu. Press the ENTER button
to start the configuration. The display indicates "PLEASE
SELECT FIXTURE". After your settings, keep pressing the
MENU button for 3 seconds to exit the system settings.
Step 2: Adjust the DMX Start Addresses of
the Fixtures
If you do not want to use more than 15 fixtures, you can
adjust the DMX starting addresses on your fixtures accord-
ing to the controller's default values, i.e. a multiple of 34 +
1. Set the first fixture to the starting address 1, the second
to 35, the third to 69 etc. If identical units are to be con-
trolled synchronously, they can receive the same starting
address; otherwise each unit must receive an individual
address. For further information, please refer to the unit's
documentation.
No.
Fixture
1
2
3
4
A
5
6
7
8
Start
No.
Address
1
35
69
103
B
137
171
205
239
Fixture
Start
Address
9
273
10
307
11
341
12
375
13
409
14
443
15
447
16
511
No.
Fixture Start Address
17
18
19
20
C
21
22
23
24
NAVIGATOR EXPERT RDM
-
-
-
-
-
-
-
-
P. 15
ENGLISH VERSION
Tabla de contenido
