Exhaust System; For Energy Conservation - ALLIANCE SWD619N Instalación/Operación

Maintenance

Exhaust System

The exhaust duct should be inspected after one year of
use and cleaned if necessary by a qualified service
person to remove any lint build-up. Inspect and clean
exhaust duct every one to two years as required
thereafter.
The weather hood should be checked frequently to
make sure the dampers move freely, dampers are not
pushed in and that nothing has been set against them.
Keep dryer area clear and free from combustible
materials, gasoline and other flammable vapors and
liquids.
Do not obstruct the flow of combustion and ventilation
air.
NOTE: Verify proper operation after servicing.
64 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

For Energy Conservation

Make sure the lint filter is always clean.
Do not overload dryer.
Do not overdry clothes.
Remove items to be ironed while still damp.
Large loads of similar fabrics dry the most
efficiently. However, dry permanent press in
smaller loads to prevent wrinkling.
Use the correct temperature FABRIC
SELECTOR setting for the type of fabric being
dried.
Locate your dryer so the exhaust duct is as short
and straight as possible.
Do not open the door during the drying cycle.
Plan to do your laundry on low humidity days;
your clothes will dry faster.
Should you plan to dry several loads, do them
one after another, then you do not have to reheat
the dryer's interior parts each time.
801539