Step 4: (Gravity Drain Models Only) Connect Drain Outlet To Drain System; Step 5: (Gas Dryer Only) Connect Gas Supply Pipe - ALLIANCE SWD619N Instalación/Operación

Installation
Step 4: (Gravity Drain Models Only)
Connect Drain Outlet to Drain System
Remove drain fitting and hose clamp from accessories
bag, and clamp fitting onto drain outlet.
Connect the drain fitting to a vented drain system
using a flexible connection (obtain locally). The drain
system must be vented to prevent an air lock or
siphoning.
IMPORTANT: Increasing the drain hose length,
installing elbows, or causing bends will decrease
drain flow rates and increase drain times,
impairing machine performance.
2
1
1 Drain Trough
2 Drain Outlet
Figure 8
20
SWD745N
SWD745N
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Step 5: (Gas Dryer Only) Connect Gas
Supply Pipe
For further assistance, refer to section on Gas
Requirements.
1. Make certain dryer is equipped for use with the
type of gas in laundry room. Dryer is equipped at
the factory for Natural Gas with a 3/8 inch
N.P.T. gas connection.
2. Remove the shipping cap from the gas
connection at the rear of the dryer. Make sure you
do not damage the pipe threads when removing
the cap.
3. Connect to gas supply pipe using a new flexible
stainless steel connector.
4. Tighten all connections securely. Turn on gas and
check all pipe connections (internal and external)
for gas leaks with a non-corrosive leak detection
fluid.
5. For L.P. (Liquefied Petroleum) gas connection,
refer to section on Gas Requirements.
801539