Step 3: Add Laundry Supplies; Step 4: Determine Proper Controls For Washer; Step 5: Set Fabric Selector And Wash Temperature - ALLIANCE SWD619N Instalación/Operación

Operation

Step 3: Add Laundry Supplies

Open dispenser drawer. Measure and add low sudsing
detergent (1), bleach (2) and fabric softener (3) to the
dispenser drawer. Refer to Figure 45. Close dispenser
drawer.
IMPORTANT: If using detergents made for
topload washers, avoid oversudsing by using 1/2 of
the recommended amount.
CAUTION
Dispenser drawer requires a special tool for
removal. Contact a service person if
removal is necessary.
1 Detergent
2 Bleach
3 Fabric Softener
Figure 45
50
W236
3
1
2
SWD753N
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Step 4: Determine Proper Controls for
Washer
The direction of the arrow indicates which controls are
for the washer.
Figure 46
Step 5: Set Fabric Selector and Wash
Temperature
Push keypad for NORMAL/HOT, NORMAL/
WARM, PERM PRESS/WARM or DELICATES/
COLD cycle. Light indicates selection.
NOTE: Changes can be made to Fabric Selector
setting up until the first fill is complete.
Figure 47
DRY1930N
DRY1930N
FLW1920N
FLW1920N
801539