Step 8: Start Washer; Indicator Lights - ALLIANCE SWD619N Instalación/Operación

To Insert Card
Insert card into opening. DO NOT remove the card
until the REMOVE CARD LED is lit.
Figure 58

Step 8: Start Washer

After vend price has been satisfied, push the START
keypad. DOOR MUST BE CLOSED TO START
WASHER.
PERM
NORMAL
PRESS
HOT WARM
Figure 59
801539
M343I
DELICATES
START
COLD
H207I
H207I
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Indicator Lights

WASH
WASH is lit at the beginning of a Wash cycle and will
remain lit until the Wash cycle is complete.
RINSE
RINSE is lit at the beginning of the Rinse or Extra
Rinse cycle and will remain lit until the Rinse cycle is
completed.
SPIN
SPIN is lit for all Spin cycles.
DOOR LOCKED
DOOR LOCKED is lit whenever the door is locked.
The door cannot be opened when this light is on.
INSERT COIN/CARD
INSERT COIN/CARD is lit to prompt the user to insert
coins or a card to satisfy the vend price. When INSERT
COIN/CARD is lit, the digits and decimal point show
the vend price remaining to be satisfied.
REMOVE CARD (Card Models Only)
REMOVE CARD flashes after the START keypad has
been pressed and the vend has been deducted from the
card.
IMPORTANT: If washer fails to operate properly after installation, make sure electrical service and
water supply faucets are turned on. Are all the
controls properly set? Have a qualified serviceman
refer to the wiring diagram (located inside of
washer control cabinet), check for broken, loose or
incorrect wiring.
NOTE: Once a cycle has started, the door can only
be opened by first unplugging the power cord and
waiting one minute.
WARNING
To reduce the risk of bodily injury, do not
remove laundry from washer until all lights
are out, and all moving parts have stopped.
Operation
W092
55