en
32 | CRR 320 | Menu item: Memory
12. Menu item: Memory
Use the navigation keys
main menu.
In the main menu, select the menu item "Memory" with
the navigation keys
or
Confirm selection with the acknowledgement key
The following sub-menus are contained in the memory
menu:
Designation
Description
Display memory
Display of the individual valu-
es contained in the memory
Erase memory
Erasing of
ta contained in the memory
Curve plotting
Activation or deactivation of curve plotting
12.1
Displaying memory
Use the navigation keys
item "Display memory".
Confirm selection with the acknowledgement key
The navigation keys
or
select each individual measured value.
The acknowledgement key
the sub-menu.
The cancel key
can be used to switch to the main
menu.
12.2
Erasing memory
Use the navigation key
"Erase memory".
Confirm selection with the acknowledgement key
!
ATTENTION! CAUTION!
Following confirmation of the "Erase memory" func-
tion, all the measured data stored in the CRR 320
are irrevocably deleted!
¶
In the interests of safety, read out the memory con-
tent with the aid of the PC software and save these
data on your PC.
|
0 986 629 502
2015-02-16
or
to switch to the
.
ALL
measurement da-
or
to select the menu
can then be used to
can be used to switch to
to select the menu item
13. Curve plotting
Curve plotting data can only be displayed and presen-
ted with the aid of the PC software.
Selection of menu item
Use the navigation keys
item "Curve plotting".
.
Confirm selection with the acknowledgement key
Curve plotting can then be activated or deactivated
with the navigation keys
with the acknowledgement key
The cancel key
can be used to terminate the entry
and switch to the main menu.
i
Useful hint: Curve plotting can also be activated
during a measurement.
¶
This involves keeping the key
prox. 3 seconds.
¶
.
Curve plotting is deactivated again by pressing the
key
again for approx. 3 seconds.
.
or
to select the menu
.
or
. Confirm selection
.
pressed for ap-
Robert Bosch GmbH