Tabla de contenido
Idiomas disponibles
Idiomas disponibles
•
Clean the machine, and above all where the discs rest, with a cloth or a sponge
wet with warm water, accurately remove all wastes to prevent the discs from
changing their position.
•
Open the cover and loosen the 2 pins as shown in fig.6. Remove the cover and
wash under a water jet.
•
Clean the surfaces with water and soup, alcohol, detergents without abrasives or
substances based on chlorine or soda (chlorine water, muriatic acid).
•
Never use abrasives, steel wool, or similar products as they may bring damages
to the paint, the coat, ot the machine body. For cleaning, use non-toxic products
and ones that guarantee the best hygiene.
Machine idle for a long time
Should the machine be idle for a long time, disconnect the main wall switch and clean
the machine and its accessories accurately. Use white vaseline oil (or similar pro-
ducts) to protect all the machine's elements.
These products, mainly made up of oily and detergent substances, and now available
in spray cylinders for easy applicant, besides giving a glossy aspect to the aluminium
magnestism alloy, prevent moisture and dirt from getting inside the machine, hence, its
corrosion. We advise covering the machine with a nylon (or similar) cloth.
REGULAR CONTROL OF THE DEVICE
Control regularly that the device doesn´t present any damage. If it should be the case,
please contact your customer service to solve the problem.
22
WHAT TO DO IN CASE OF PROBLEM?
Please contact your customer service and join following information:
•
Invoice number and serial number (the latest is to be found on the technical
plate on the device).
•
If relevant, a picture of the damaged, broken or defective part.
•
It will be easier for your customer service clerk to determinate the source of
the problem if you make a detailed and precise description of the matter. Avoid
formulations like "the device doesn´t work", which may mean that it doesn´t slice
properly or even not at all. Though, those two possibilities have a different causa-
tion!
The more detailed your information, the quicker the customer service
will be able to answer your problem rapidly and efficiently!
CAUTION: Never open the device without the authorization of your
customer service. This can lead to a loss of warranty!
TROUBLESHOOTING
Problem
Cause
Polit light on the panel in
One or both microswit-
on, but the machine does
ches do not close proper-
not start
ly the electric circuit
Solution
•
Check that the
housing is closed
properly
•
Check that the handle
is mounted correctly.
23
Tabla de contenido
Solución de problemas
