Idiomas disponibles
Idiomas disponibles
[ZERO] - will reset the quantity and weight. At the same time, the "ZERO"
•
indicator will light up on the WEIGHT display.
•
[TARE] - pressing it activates the automatic taring function (range <100%
of the full amount) and the "TARE" light will lit up.
•
[UNIT] - in the weighing option pressing this key will change the unit of
mass.
[PRINTER] - data will be sent from the scale to a connected printer or
•
computer.
[ENTER] - selection / approval key.
•
•
[MEM / STORE] - memorizing the weight of a single item on the scale.
The device can store up to 16 such weights in the memory.
[MEM / READ] - recalling the stored weight of a weighed item. Each time
•
this key is pressed, the weights are recalled - up to 16 remembered.
[M +] - Used to collect count data. When pressed, they are stored and a
•
total of 99 different ones can be stored.
•
[MC] - erasing of the stored data.
[SAMPLE] - used to record the number of pieces on the pan.
•
•
[UNIT / WEIGHT] - weight of a single item in case of entering a unit
weight during quantitative weighing.
[QTY / SET] - It is used to alternate between the normal counting mode
•
and the quantity checking operation.
[ꙮ] - change options during setting. Used to change the weight (pan)
•
with an additional platform connected.
•
[TOTAL] - displays the total number of items on the pan.
[ESC] - exit from the current menu.
•
•
[CE] - it is used to clear the data of numerical settings or to cancel the
previous data of a piece weight.
3.4.
Cleaning and maintenance
a)
Pull out the mains plug before each cleaning and when the unit is not in use.
b)
Use only non-corrosive cleaning agents for cleaning the surfaces.
c)
Store the unit in a dry and cool place protected from moisture and direct
sunlight.
d)
Do not spray the unit with a stream of water or immerse it in water.
e)
Make sure that no water enters through the ventilation openings in the casing.
f)
Perform regular inspections of the unit checking technical fitness and any
damages.
g)
Use a soft cloth for cleaning (scale).
h)
Do not leave the batteries in the unit when it will not be used for a long time.
i)
For cleaning, use a soft, damp cloth (pan).
