ARAG 466852 Serie Instalación Uso Y Mantenimiento página 10

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
IMPORTANT:
The control box is equipped with an internal self-resetting safety device that cuts the
power in case of operational defects or problems.
If the safety device starts up, all the warning lights on the box go out, but since no other
signal is provided for, the operator must pay attention that the box is still active and that
when a command is selected on the box the action is performed by the system (Fig. 4).
If the control box goes off due to the safety device and the operator wishes to stop
spraying (if in operation), he must do so by acting on the pump.
If the internal safety device starts up, it is necessary to remove power from the box (by
turning off the tractor) and wait at least 20 seconds before restarting. Should the problem
persist, contact the nearest Assistance Centre.
4
USE
CAUTION:
For the implementation on already operating systems it is necessary to follow all safety
rules described herein.
System assembly and start-up must be carried out by expert personnel according to the
safety rules so as to ensure the same safety level of the system the control box is going
to be installed in.
▀ Section valves switches (Fig. 5).
From 1 to 2, according to the number of valves in the unit.
By pushing the switch up, the corresponding valve opens and starts dispensing.
The LED ON indicates the switch is in spraying position.
▀ Switches for Adjustable Actuators/Guard Actuators (Fig. 6).
- ADJUSTABLE ACTUATOR control mode:
The switch is usually in the central position: move it up or down to activate the relevant function.
- GUARD ACTUATOR control mode:
When user moves the switch up or down, the relevant guard will be to closed/opened.
10
loading

Este manual también es adecuado para:

46685253466852634668525146685261