Idiomas disponibles
Idiomas disponibles
Fitting the blade
Fitting and removing the weeder blade
BEFORE OPERATION
Checking the battery condition
Charging the battery pack
More details can be found in charger's
manual
Installing the battery pack
Removing the battery pack
OPERATION
Starting& Stopping
Trimming grass
NOTE: Keep the tool away from hard
objects and delicate plants. To make a
closer cut, slightly tilt the tool.
Trimming hedges and shrubs
NOTE: Take care to avoid any foreign
objects. Especially avoid hard objects such
as metal wire and railings, as these could
damage the blades.
Weeding grass
NOTE: To ensure efficient operation, blade
cleaning should be performed in time after
each work.
18
Operating with the telescopic handle
Assembling/removing the telescopic
handle
NOTE:
-Install the battery pack first before
assembling the telescopic handle.
-Make sure the telescopic handle is locked
into position securely before operation.
-Keep hands away from the on/off switch
when attach or remove the telescopic
handle to prevent accidental start.
Adjusting the handle length
NOTE: The locking knob is used to hold
the handle in position at any extended
length.
Adjusting the cutting height
NOTE: The telescopic handle has two
cutting height levels (25mm &43mm).
Starting and stopping with the telescopic
handle
Warning: Do not use the shrub shear
blades (12cm/20cm) when working
with the telescopic handle.
6.MAINTENANCE
NOTE: To ensure long and reliable service, carry out the
following maintenance regularly.
Cordless shrub shear /
grass shear / weeder
Remove the battery before carrying out any adjustment,
See Fig. B1,
servicing or maintenance.
B2
Check for obvious defects such as loose, dislodged or
See Fig. B3,
damaged blade, loose fixings and worn or damaged
B4
components.
Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
See Fig. C1
repairs before using.
See Fig.
BLADE MAINTENANCE
C2,C3
See Fig. C4
Always clean the cutting blades after operation and
periodically lubricating the cutting blade.
See Fig. C5
Visually check the condition of the cutting edges of the
cutting blade.
Ensure that the blade is covered with the blade guard
See Fig. D
supplied when not in use.
See Fig. E
7.CLEANING/STORAGE
Clean the exterior of the machine thoroughly using a soft
brush and cloth. Do not use water, solvents or polishes.
Remove all debris, especially from the ventilation slots.
See Fig. F
Store the machine in a secure dry place out of reach
of children. Do not place other objects on top of the
machine.
See Fig. G
8.ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities or
retailer for recycling advice.
See Fig. H1,
H2
9.DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
See Fig. I
Declare that the product,
Description Worx cordless shrub shear and grass shear
See Fig.
Type WG801E WG801E.X WP808E WP808E.X
J1, J2
(800-809-designation of machinery, representative of
grass shear/shrub)
Function Cutting grass, trimming hedges and brushes
See Fig. K
Complies with the following Directives,
2006/42/EC, 2014/30/EU
2011/65/EU&(EU)2015/863
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per Annex V
- Measured Sound Power Level 79.4dB (A)
- Declared Guaranteed Sound Power Level 82dB (A)
EN
