Idiomas disponibles
Idiomas disponibles
3.TECHNICAL DATA
Voltage
No Load Speed
Max. cutting diameter
Machine weight
(bare tool)
** Voltage measured without workload. Initial bat-
tery voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
*** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
SUGGESTED BATTERIES
AND CHARGERS
Category
WA3550
WA3550.1
20V Battery
WA3551
WA3551.1
WA3760
20V Charger
WA3860
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K
pA
Wear ear protection
Cordless shrub shear /
grass shear / weeder
WG801E WG801E.X **
WP808E WP808E.X **
20 V
Max ***
1150 rpm
8mm for shrub blade
0.5 kg
Model
Capacity
1.5 Ah
1.5 Ah
2.0 Ah
2.0 Ah
0.4 A
2.0 A
WA3880
2.0 A
L
: 66dB(A)
pA
L
:82dB(A)
wA
3.0dB(A)
VIBRATION INFORMATION
Typical weighted vibration
WARNING: The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool is
used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
Using the correct accessory for the tool and ensuring it is
sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome if its
use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off and
when it is running idle but not actually doing the job. This
may significantly reduce the exposure level over the total
working period.
Helping to minimise your vibration exposure risk.
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration tool
use across a number of days.
4.INTENDED USE
The product is intended for light trimming of shrubs and
lawn edges in domestic use.
5.OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
ASSEMBLY & OPERATION
ACTION
ASSEMBLY (Fitting/Changing the blade)
Removing the blade
Warning: Wear gloves when changing
the blade.
a
<3.6m/s
2
h
uncertainty K=1.5m/s²
FIGURE
See Fig. A1,
A2
EN
17
