Idiomas disponibles
Idiomas disponibles
park Plug Maintenance
Spark plug inspection
The spark plug is an important engine component
and should be checked periodically.
1. Open the side panel (1).
2. Remove the spark plug cap
(2).
3. Insert the tool (3) through the
hole in the outside of the cover.
4. Insert the handlebar (4) into
the tool (3) and turn it counter-
clockwise to remove the spark
plug.
5. Check for discoloration. The
carbon
around the center electrode of
spark
Medium-to-light tan color.
6. Check the spark plug type
and gap. The spark plug gap
should be measured with a wire
thickness gauge and, if neces-
sary, adjusted to specification.
7. Install spark plug, spark plug
cap, cover and screws.
www.ducsonpower.com
porcelain
insulator
plug
should
be
5.3
Engine Oil Replacement
Initial replacement of the engine oil is after one
month or 20 hours of operation.
a
1. Place the generator on a
level surface and warm up the
engine for several minutes.
Then stop the engine and turn
the Fuel Petcock knob to "OFF"
and the Fuel Tank Cap Air Vent
knob to "OFF".
2. Open the side panel (1).
3. Remove the oil filler cap.
4. Place an oil pan under the
engine. Tilt the generator to
drain the oil completely.
5. Return the generator to a
level surface.
Note: DO NOT tilt the genera-
tor when adding engine oil.
This could result in overfilling
and damage to the engine.
6. Add engine oil to the upper
level as seen in the diagram
(1).
16
