Idiomas disponibles
Idiomas disponibles
Replace oil filler cap and secure side panel with
screws .
Recommended engine oil:
A. YAMALUBE 4 (1OW-40)
SAE1OW-30 or 1OW-40
B. SAE #30
C. SAE#20
D. SAE#10W
Recommended engine oil grade: API Service SE type
or higher Engine oil quantity:
0.4L (0.42 US qt , 0.35 Imp qt
3.3 Adding Fuel
DO NOT overfill the tank, otherwise it may overflow
when the fuel warms up and expands.
Note:
For safety reasons, once fuel has been added to this
unit it cannot be returned to the place of purchase.
www.ducsonpower.com
1. Use clean, fresh, regular unleaded fuel with a
minimum octane rating of 85.
2. DO NOT mix oilwith fuel.
3. Clean area around the fuel cap.
4. Remove the fuel cap.
5. Be sure that the fuel strainer is in place.
6. Slowly add fuel to the tank.
7. Do not exceed the red marker position of the
fuel filter.
8. Screw on the fuel cap and wipe away and spilled
fuel
Note:
Use only unleaded gasoline.
The use of leaded gasoline will cause severe
damage to internal engine parts.
After filling with fuel, make sure the fuel tank cap
is tightened securely.
10
