Idiomas disponibles
Idiomas disponibles
4.5 Battery Charging
Start the engine first and allow it to reach idle before
connecting the generator to the battery. Battery
Charging is performed using the 12V DC outlet
only.
1. Be sure the Throttle switch is turned "OFF" while
charging batteries.
2. Be sure to connect the red battery charger lead to
the positive (+) battery terminal, and connect the
black lead to the negative (-) battery terminal. DO
NOT reverse these positions.
3. Connect the battery charger leads to the battery
terminals securely so that they do not disconnect
due do engine vibration or other disturbances.
4.6 Wattage Reference Guide
These are estimates only. Check your tool or appliance for exact wattage requirements . The wattages
listed are based on estimated wattage requirements .
www.ducsonpower.com
4. Charge the battery by following the instructions
in the owner's manual for the battery.
5. The DC Circuit Breaker will turn "OFF" automati-
cally if the current exceeds rated output.
6. To restart charging the battery, turn the DC pro-
tector on by pressing its button to "ON"
7. Refer to the owner's manual for the battery to
determine charging times.
Note: Never start or stop the generator with electri-
cal devices plugged in or turned on.
14
