Idiomas disponibles
Idiomas disponibles
Parrallel Output
Two generators can be connec-
ted to increase output. Put para-
llel wire into the socket first, then
start the two greater wattage as
the normal process.
Note: put the connection wire into the right Sockets
(Please refer to 4.4 for how to connect properly)
Multi-Switch
The multi-switch control fuel
valve, choke and engine switch.
When starting the generator,
rotate the multi-switch counter
clockwise from STOP to START
position, then pull recoil cord
quickly to start.After started,
rotate the switch to RUN posi-
tion.
NOTE:
To shut off generator rotate Multi-Switch clockwise
to OFF position and hold until generator turns off.
www.ducsonpower.com
120 V - AC output
NOTE:
When two generators are connected in parallel for
greater wattage loads, an RV(NEMA TT-30) adap-
tor is provided.
120 Volt 5-20R
Grounding
Properly ground generator to prevent
Connect the ground terminal of generator to
ground electrode buried in the ground.
5V 1A DC USB
The Outlet is used to power
120V Single Phase 60Hz loads
requiring up to 1600W conti-
nuous powwer.
120V AC twist lock receptacle
(NEMA LR-30R) may be used to
supply electrical power when
parallel connection .
The Outlet is used to power
120V Single Phase 60Hz loads
requiring up to 1600W conti-
nuous power.
8
