Ryobi RBS904 Manual Del Usuario página 20

TIRES
Cleaning tires:
■
Pitch and sawdust accumulates on tires and needs
to be removed with a fine wire brush or a piece
of wood. Do not use a sharp knife or any kind of
solvent.
Replacing tires:
■
Open front cover and remove saw blade. See section
on Installing and Adjusting the Blade.
■
Pry the worn tire away from the wheel carefully.
■
Stretch the new tire around the wheel.
■
Replace the saw blade and close the front cover.
BRUSH
See Figure 22.
There is a brush located inside the saw housing next to
the wheel. It helps protect the tire and wheel by brushing
off saw dust. As the brush becomes worn, it will need to
be adjusted or replaced.
■
Remove the screw and washer then pull the brush
off.
■
Place the new brush in the groove.
■
Reinstall using the washer and screw.
TRANSPORTATION AND STORAGE
See Figures 23 - 24.
■
When transporting the product, disconnect the
power cord, lower the blade guard and unmount the
product. Store the push stick on the side of upper
housing. Lift the product by the upper housing as
shown. Store the product in a secure place which is
not accessible to children.
■
Clean the product using a brush and vacuum cleaner
before storage.
SYMBOL
Safety alert
European Conformity Mark
British Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
20
Original Instructions
Please read the instructions carefully before
starting the product.
Wear eye protection.
Wear ear protection.
Danger! Sharp blade.
Lock
Unlock
Maximum cutting depth
Maximum cutting width
Maximum cutting angle
Operating speed
Blade size
The tool shall be disconnected from the
supply before maintenance.
Do not dispose of waste electrical and
electronic equipment as unsorted municipal
waste. Waste electrical
equipment must be collected separately.
Waste light sources have to be removed
from the equipment. Check with your local
authority or retailer for recycling advice
and collection point. According to local
regulations, retailers may have an obligation
to take back waste electrical and electronic
equipment free of charge. Your contribution
to the reuse and recycling of waste electrical
and electronic equipment helps to reduce
the demand of raw materials. Waste
electrical and electronic equipment contain
valuable and recyclable materials, which
can adversely impact the environment and
the human health if not disposed of in an
environmentally compatible manner. Delete
personal data from waste equipment, if any.
and electronic