Gaggenau 200 Serie Instrucciones De Uso Y Montaje página 20

Fitting the lower support frame
Attach upper and lower parts of the support frame at
the specified total height using 10 screws.
Notes
‒ Ensure that the lower support frame is in the
correct position. The open side must be facing
the control element of the cooktop.
‒ The support frame can be re-aligned by
loosening the fastening screws.
Installing the appliance
1 Hook the appliance from below into the support
frame.
Note: Ensure that the mains cable is not
trapped.
20
2 Attach the appliance to the support frame using
2 fastening screws.
3 Hook in retaining clip and screw tight.
Connecting the pipes
Note: If an aluminum pipe is used, smooth the
connection area beforehand.
Exhaust-air pipe Ø 6" (150 mm) (recommended size)
Attach exhaust-air pipe directly to the air-pipe
connector and seal.
_ Exhaust-air pipe Ø 4
1 Attach reducing connector directly to the air-
pipe connector.
2 Attach exhaust air pipe to the reducing
connector.
3 Seal both joints appropriately.
" (120 mm)