Idiomas disponibles
Idiomas disponibles
7
Troubleshooting
Drying process lasts for a long time.
•
Pores of the fibre filter might be clogged. >>> Wash the filter with warm water.
•
Condenser might be clogged. >>> Wash the condenser.
•
Ventilation grills at the front of machine might be blocked. >>> Remove any items in front of the ventilation
grills that block ventilation.
•
Ventilation might be inadequate if the installation area is very small. >>> Open the windows and doors in order
to prevent excessive increase in room temperature.
•
There might be furring on the damp sensor. >>> Clean the damp sensor.
•
Laundry might be overloaded. >>> Do not overload the tumble drier.
•
Laundry might not have been adequately spun. >>> Increase the rpm of tumble drier.
Laundry is still wet at the end of drying.
C
Hot laundry unloaded at the end of drying feel wetter than they really are.
•
You may not have used a program suitable for laundry type.>>> Check the maintenance labels on the laundry
and select a program suitable for their type, or use the time programs additionally.
•
Pores of the fibre filter might be clogged. >>> Wash the filter with warm water.
•
Condenser might be clogged. >>> Wash the condenser.
•
Laundry might be overloaded. >>> Do not overload the tumble drier.
•
Laundry might not have been adequately spun. >>> Increase the rpm of tumble drier.
Tumble drier does not turn on or program cannot be started. Tumble drier does not activate when set.
•
The power cord might not be plugged in. >>> Make sure the power cord is plugged in.
•
Loading door might be open. >>> Make sure that the loading door is properly closed.
•
You may not have set the program or pressed the Start/Pause button. >>> Make sure that you have set the
program and it is not in Pause position.
•
Child lock might be active. >>> Disable the child lock.
Program was interrupted for no reason.
•
Loading door might not be properly closed. >>> Make sure that the loading door is properly closed.
•
A power cut might have occurred. >>> Press the Start/ Pause button to start the program.
•
Water tank might be full. >>> Drain the water tank.
Laundry is shrunk, felt or worn out.
•
You may not have used a program suitable for laundry type. >>> Check the maintenance labels on the laundry
and select a program suitable for their type.
The lighting inside the tumble drier does not turn on. (In models with lamps)
•
You may not have turned on the tumble drier be using On/Off/Cancel button. >>> Make sure that the tumble
drier is at 'on' position.
•
Lamp might be broken. >>> Contact the Authorized Service for the replacement of lamp.
Filter cleaning warning led is on.
•
Fibre filter might not have been cleaned. >>> Clean the filter.
Filter cleaning warning led flashes.
•
Filter bearing might be clogged with fibre. >>> Clean the filter bearing.
•
There might be a layer in the filter pores that causes clogging. >>> Wash the filter with warm water.
•
Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.
Dryer / User Manual
27 / 56 EN
