cecotec BOLERO 10500 INVERTER A Manual De Instrucciones página 60

ENGLISH
3. INSTALLATION
NOTE
It is recommended that your new washing machine is installed by a qualified technician. If
you think you're able to install the washing machine, please read the installation instructions
carefully before proceeding with installation.
Needed tools
It is recommended that you have the following tools to facilitate the installation of the washing
machine: scissors, pliers, standard screwdriver, gloves, and spanner.
Unpacking the washing machine
Unpack the washing machine and check if it has suffered any damage during transport. Should
the machine be damaged or any items missing, please contact your local retailer immediately.
Choosing the location for installation
- Choose an installation location that complies with the following characteristics:
- Rigid, dry, and level surface (if not level, please read the "Levelling the washing machine"
section).
- No direct sunlight.
- Properly ventilated.
- Ambient temperature between 0 and 40°C.
- Ambient humidity below 95% (when the temperature is 25°C).
- Keep the washing machine away from heat sources such as coal or gas. Make sure the
washing machine is not crushing the power cord. Do not install the washing machine on
carpeted floors.
Removing the transport bolts. Fig. 5
Before using the washing machine, remove the transport bolts from the back of the appliance.
To do so, follow the below steps:
1. Loosen the four transport bolts.
Grab the bolts by the head and pull them out.
2.
3. Fit the plastic caps into the holes of the transport bolts.
Store the transport bolts in a suitable place for future use.
4.
Levelling the washing machine
Fig. 6 key:
A. Structure of the levelling feet:
Lock nut
1.
2. Rubber base
B OL E RO D RE SS CO D E 10 5 0 0 I N V E RTE R A
60
B OL E RO D RE SS CO D E 10 5 0 0 I N V E RTE R STEEL A