EGO LM2130 Manual Del Operador página 22

REMOVING THE BLADE
WARNING:
the cutting edges with rags or other materials when performing any maintenance on
the mower blade. Always remove the battery pack when servicing or transporting the
mower.
NOTICE:
The following tools (not included) are required for replacing the blade:
◾
9/16" (14mm) wrench;
◾
11/16" (17mm) wrench;
◾
Torque wrench with 9/16" (14mm) and 11/16" (17mm) sockets;
◾
Manual screwdriver or metal rod 5/16" (8 mm) or less.
◾
Manual screwdriver or metal rod 1/4" (6.35 mm) or less.
Tools that make life easier: Impact wrench with 9/16" and 11/16" sockets make the
removing the bolts/nuts much easier.
1. Stop the motor; remove the battery
pack from the mower.
2. Turn the mower on its side.
3. Wear protective gloves. Insert a
manual screwdriver or metal rod
5/16" (8 mm) or less in the stabilizer
hole. This is to stop the blade from
rotating while loosening the bolt/nuts
(Fig. 1).
4. Use a 11/16" (17mm) wrench to
loosen and remove the two 11/16"
"Blade Set" nuts (Fig. 2). SAVE THE
TWO NUTS FOR LATER BLADE
REASSEMBLY.
22
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC/LM2150SP/LM2150SP-FC
Always protect your hands by wearing heavy gloves or wrapping
1
2
Stabilizer
"Blade Set" Nut