EGO LM2130 Manual Del Operador página 28

3. UPPER OPERATING POSITION: Lift
the handle with one hand. Gently
pivot the handle backward until you
hear and feel the lock pin engage in
the Upper Operating Position. Fully
extend the side rails and securely
close the two handle-locking clamps
(Fig. 18 & 19). Taller users may
prefer this position.
4. MIDDLE OPERATING POSITION:
Press and hold the quick-adjust
lever with one hand to release the
handle from the upper operating
position. Begin to lower the handle
with your other hand, and then
release the lever. Gently pivot the
handle downward until you hear
and feel the lock pin engage in the
Middle Operating Position. Fully
extend the side rails and securely
close the two handle-locking clamps
(Fig. 18 & 19).
5. LOWER OPERATING POSITION: Press
and hold the quick-adjust lever
with one hand to release the handle from the middle operating position. Begin to
lower the handle with your other hand, and then release the lever. Gently pivot
the handle downward until you hear and feel the lock pin engage in the Lower
Operating Position. Fully extend the side rails and securely close the two handle-
locking clamps (Fig. 18 & 19).
NOTE:
The motor cannot be started unless:
a) The side rails are fully extended
b) Both green handle-locking clamps are securely closed
c) The handle is locked into one of the three operating positions.
28
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC/LM2150SP/LM2150SP-FC
18
19
2
1
Indication Line