Rear Panel Of The Processor - Sony MDR-DS1000 Manual De Instrucciones

Rear Panel of the Processor

1 ATT (attenuator) switch
Set this switch to "0 dB" if the volume is
too low for analogue input. Normally, this
switch should be set to "–8 dB."
2 LINE IN jack
(See page 9 for details.)
Connect the audio output jacks on an
audio or video component (sold
separately), such as a video cassette
player or TV, to these jacks.
LINE IN
ATT
0dB -8dB
DIGITAL IN
DC IN9V
3 DIGITAL IN jack
(See page 8 for details.)
Connect a DVD device or other digital
component (sold separately) to this jack.
4 DC IN 9V jack
Connect the supplied AC power adaptor
to this jack. (Be sure to use the supplied
AC power adaptor. Using products with a
different plug polarity or other
characteristics can cause a malfunction.)
Preparation
GB
7