Makita TD021D Manual De Instrucciones página 5

When the lock lever is in the locked position
switch cannot be actuated.
When the lock lever is in the unlocked position
switch can be actuated.
Switch action
CAUTION:
• Before inserting the battery cartridge into the
tool, always check to see that the switch actu-
ates properly and returns to the "OFF" position
when released.
1
2
► 1. Lock lever 2. Switch
To start the tool, first move the lock lever to the
unlocked position to release the switch lever.
A
B
► 1. Switch
And then turn the switch to A side for clockwise rotation
or to B side for counterclockwise rotation.
Tool speed is increased by increasing rotation force on
the switch. Release the switch to stop.
CAUTION:
• Always check the direction of rotation before
operation.
• Change the direction only after the tool comes
to a complete stop. Changing the direction of
rotation before the tool stops may damage the
tool.
• When not operating the tool, always set the lock
lever in the locked position
Lighting up the front light
CAUTION:
• Do not look in the light or see the source of light
directly.
, the
, the
B
A
1
.
1
► 1. Lock lever 2. Light
To start the tool, first move the lock lever to the released
position to release the switch.
A
B
► 1. Switch
To put on the light only, rotate the switch to the A or B
side a little.
To not only put on the light but also start the tool rotate
the switch to the A or B side more.
Release the switch to stop the lamp and tool.
NOTE:
• Use a dry cloth to wipe the dirt off the lens of
lamp. Be careful not to scratch the lens of lamp,
or it may lower the illumination.
ASSEMBLY
CAUTION:
• Always be sure that the lock lever is in the
locked position
tridge is removed before carrying out any work
on the tool.
5 ENGLISH
2
B
A
1
mark and the battery car-