Idiomas disponibles
Idiomas disponibles
5
Installation of appliance
5.6 Installation of air baffle
While using with the carbon filter, air baffle is pro-
vided with your appliance with the aim of re-re-
leasing the air which is cleaned with carbon filter
from the perforated located on the flue. Assemble
the air baffle as follows.
(Figure 6)
There is a tab in the middle of the flue connection
plate. Place the middle point of this tab on the line
that is drawn perpendicular to the wall. Align hori-
zontally and mark the holes where the connection
plate will be mounted via a pen (Figure 6/A, B).
Drill the marked points with Ø6mm drill and insert
2 plastic dowels in the drilled holes (Figure 6/A, B).
Fix the flue connection plate to the wall with
3.9x22 screws (Figure 6/A, B).
For air baffle assembly, install point C, D, E, F with
Ø6mm drill and Ø6mm plastic dowels (Figure 6).
Assemble cooker hood's body (Figure 4).
(Figure 7)
Cooker Hood / User Manual
1. Flap Pin Socket
2. Flap Pin
Insert the plastic pin (Figure 7/area no. 2) on the
pin socket on the motor exhaust (Figure 7/area
no.1). Then bend the flap lightly to insert the other
pin on the flap and insert the other pin to its socket
(Figure 7).
(Figure 8)
1. Air Baffle
2. Plastic Flue
Attach the plastic flue adapter, which is included in
the package, in the direction of the air baffle. Lock
the flue adapter by turning it in the direction of the
arrow (Figure 8).
(Figure 9)
Assemble the air baffle group with 3.9 x 22
screws from point C, D, E, F that you have already
prepared (Figure 9).
1
2
15 / EN
