Idiomas disponibles
Idiomas disponibles
Unpacking
Carton Contents:
• Cordless snow blower
• Middle frame
• Upper frame
• Handle knobs and bolts (4)
• Upper chute crank
• Lower chute crank
• Cable clips (3)
• Chute clean out tool with clips (2)
• 24V iON+ lithium-ion batteries (2)
• 24V iON+ lithium-ion high-speed dual port charger
• Manual with registration card
1. Carefully remove the cordless snow blower and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
+ Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the cordless snow
blower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations or save the packaging for long-term
product storage.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils
or small parts. These items can be swallowed and pose a
suffocation risk!
Battery Pack Operation
The equipment is powered by 2 lithium-ion batteries.
The battery packs are completely sealed and maintenance
free.
m
WARNING!
The cordless snow blower can only be
powered by both of the batteries together. One battery cannot
provide sufficient power to the tool. Make sure to use two
batteries of the same voltage and the same capacity. Using the
tool with batteries of different capacity will cause damage to
the batteries.
Battery Charge Level Indicator
The battery packs are equipped with a push button for
checking the charge level. Simply press the push button to
read off the battery charge level from the LEDs of the battery
indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
customer service center at
®
• 1 level monitoring LED is lit: Battery is flat. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery's service life will be greatly shortened.
Lights
Light Indicators
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
NOTE: If the charge level button does not appear to be
working, place the battery pack on the charger and charge as
needed.
NOTE: Immediately after using the battery packs, the charge
level button may display a lower charge than it will if checked
a few minutes later. The battery cells "recover" some of their
charge after resting.
Charger Operation
m
WARNING!
Charge only 24V iON+ lithium-ion battery
packs with its compatible 24V iON+ lithium-ion charger. Other
types of batteries may cause personal injury and damage.
To reduce the risk of electric shock, do not allow water to flow
into the charger's AC/DC plug.
When to Charge the iON+ 24VBAT-XR8
Lithium-iON Batteries
NOTE: The iON+ 24VBAT-XR8 lithium-ion battery packs do
not develop a "memory" when charged after only a partial
discharge. Therefore, it is not necessary to run down the
battery pack before inserting the charger plug.
• Use the battery indicator lights to determine when to charge
your iON+ 24VBAT-XR8 lithium-ion battery packs.
• You can "top-off" your battery pack's charge before starting
a big job or after a long day of use.
Charging the Batteries
1. Press the push lock buttons on the batteries to pull them
out of the equipment (Fig. 1).
Fig. 1
8
Push lock button
Battery
