SNOWJOE 24V-X2-SB22 Manual Del Operador página 11

Fig. 11
Clips
Chute Crank Assembly
1. Remove the hitch pin from the female end of the lower
chute crank (Fig. 12).
Fig. 12
Lower chute crank
(female end)
2. Install the lower crank rod by inserting it into the opening
at the back of the housing and aligning the holes (Fig. 13).
Fig. 13
Align the
holes
3. Secure the lower chute crank in place with the hitch pin
(Fig. 14).
Fig. 14
Middle frame
Chute clean-out tool
Hitch Pin
Lower chute
crank
Hitch pin
4.
Remove the other hitch pin from the lower chute crank
(Fig. 15).
Fig. 15
Lower chute
crank
5.
Slide the upper chute crank through the rubber ring
located on the middle frame (Fig. 16).
Fig. 16
Rubber ring
6.
Slide the upper chute crank into the lower chute crank
(Fig. 17).
Fig. 17
Lower chute crank
11
Hitch pin
Upper chute crank
Upper chute crank