Hisense Hi-Therma Serie Manual De Instalación Y Mantenimiento página 17

BEFORE OPERATION
4.2 FACTORY-SUPPLIED INDOOR
UNIT COMPONENTS
Accessory Image
Wall support
Gasket
Shut-off valve
(G1")
Shut-off valve
with filter (G1")
Cable tie
Drain pipe
clamp
Drain pipe
clamp
Drain pipe
Adapter tube 1
Ø15.88→Ø12.7
Adapter tube 2
Ø9.53→Ø6.35
Bolts
Instruction
manual
?
N O T E
• The previous accessories are supplied inside the packing assembly
(besides the indoor unit).
•
Additional refrigerant piping (field supplied) for connections to outdoor
unit needs to be available.
•
If some of these accessories are not packed with the unit or any
damage to the unit is detected, please contact your dealer.
Qty. Remarks
For hanging the unit
1
on the wall
Six gaskets for each
connections between
6
the indoor unit and shut-
off valves (inlet/outlet)
Connect at the water
inlet/outlet of indoor unit,
1
used to shut off the water
flow.
Connect at the water
inlet/outlet of indoor unit,
1
used to shut off the water
flow and filter impurities
in water.
3 Used for wiring binding.
Used for fastening drain
1
hose and drain pipe.
Used for fastening drain
1
hose and drain pipe.
Used for drain hose
1
connection
When using different
refrigerant pipelines, it
1
shall be considered to use.
When using different
refrigerant pipelines, it
1
shall be considered to use.
Used to fix the machine
2
to the wall support
Basic instructions for the
1
installation of the device.
5