SICK MAS Serie Instrucciones De Uso página 20

OPERATING INSTRUCTIONS
2 Safety information
2.1 General safety notes
en
2.2 Notes on UL approval
2.3 Intended use
3 Product description
3.1 Operating elements and status indicators
20 O P E R A T I N G I N S T R U C T I O N S | MAS
Read the operating instructions before commissioning.
■
■
Connection, mounting, and configuration may only be performed by trained
specialists.
■
NO
2006/42/EC
Not a safety component in accordance with the EU Machinery Directive.
SAFETY
■
Do not install the sensor at locations that are exposed to direct UV radiation
(sunlight) or other weather influences, unless this is expressly permitted in the
operating instructions.
When commissioning, protect the device from moisture and contamination.
■
These operating instructions contain information required during the life cycle of
■
the sensor.
• Sensor shall be supplied from a Class 2 voltage supply.
• UL Environmental Rating: Enclosure type 1
•
UL Temperature range is between -40 ... +60°C
The MAS is a Hall effect sensor and detects the angle between the sensor and magnet.
The sensor has three digital output channels and supports IO-Link Version 1.1.
The angle window and the assignment to the digital output channels can be configured
via IO-Link.
If the product is used for any other purpose or modified in any way, any warranty claim
against SICK AG shall become void.
The sensor has four LEDs at the rear of the sensor.
8027419.1GGF/2022-07-01 | SICK
Subject to change without notice