Idiomas disponibles
Idiomas disponibles
Connection for TIG welding
- Separately connect the torch gas hose connector (1) to the gas
main.
The protection gas flow can be adjusted using
the tap normally found on the torch (2).
3 SYSTEM PRESENTATION
3.1 General
These constant current inverter power sources are able to per-
form the following types of welding with excellent results:
- MMA,
- TIG with contact ignition with reduction of short circuit cur-
rent (TIG LIFT-START).
In inverter welders, the output current is unaffected by va-ria-
tions in the supply voltage and the length of the arc, and is
perfectly levelled, giving the best welding quality.
The generator is equipped with:
- positive (+) and negative (-) socket
- a front control panel
- a rear panel
- a rear connector for remote control.
3.2 Front control panel
GENESIS 1700
GENESIS 1700 RC / 1700 BRC
1
Power supply
Indicates that the equipment is connected to the mains
and is on.
2
General alarm
Indicates the possible intervention of protection devices
such as the temperature protection.
3
Power on
Indicates the presence of voltage on the equipment
outlet connections.
4
7-segment display
Allows the general welding machine parameters to be
displayed during start-up, settings, current and voltage
readings, while welding, and encoding of the alarms.
5
Welding process
Allows the selection of the welding procedure.
Electrode welding (MMA)
TIG LIFT welding
6
Measurements
Allows the real welding current or voltage to be dis-
played on 4.
Amperes
Volts
7
Welding parameters
The graph on the panel allows the selection and adjust-
ment of the welding parameters.
Consult the "List of set up parameters" section, N° 3-4.
8
Main adjustment handle
Allows the welding current to be continuously adjusted.
This current is unchanged during the welding if the
power supply and welding conditions vary within the
ranges indicated in the technical characteristics.
In MMA welding, the presence of HOT-START and
ARC-FORCE ensures that the average output current
can be higher than the one set.
23
